The 5 V FTDI cable (
http://shop.boxtec.ch/product_info.php/products_id/40385 ) doesn't pass well for the Stalker card. Originally, the signals are connected as follow:
Color FTDI Stalker
---------------------------
Black 0V 0V
Braun CTS 0V
Red 5V 5V
Orange Tx Rx
Yellow Rx Tx
Green RTS DTR
The correct connection must be:
Color FTDI Stalker
---------------------------
Black 0V 0V
Braun CTS 0V
Red 5V 5V
Yellow Rx Rx
Orange Tx Tx
Green RTS DTR
And all work fine!
It to be mentioned too: the speed of a serial is divided by 2. By example, a connection initialized as:
Serial.begin(9600);
The Terminal must be adjusted for 4800 Baud.
//Yves
